Evaporative Cooling Case Studies
Cooling the Label Factory

Evaporative cooling in factories
Evaporative Cooling in the Compressor Room
Cooling the Compressor Room with Evaporative Cooling

Kenilworth Products of Dublin are manufacturers of specialist labels primarily to the pharmaceutical industry.

Pharmaceutical packaging manufacture, in common with other industries such as food, require production facilities to be secure. Before these higher standards were introduced the simple solution to cooling the factory was to open the doors and windows. Since this is now not possible due to potential ingress of contaminants, pests etc, an alternative had to found to maintaining a comfortable and productive environment.

factory cooling with evaporative cooling from ecocooling

Two roof mounted down discharge EcoCoolers were installed feeding air to eight way plenum chambers. Each EcoCooler is manually controlled by a wall controller which allows 5 fan speeds and the option of ‘Cool’ or ‘Vent’ mode.

factory cooling with evaporative cooling from ecocooling

factory cooling with evaporative cooling from ecocooling
In the plate making area there is a specific requirement for temperature control. A floor mounted side discharge EcoCooler was installed feeding a ducted air distribution system. A thermostat, located within the plate making area, is used to control the air flow and cooling mode.

evaporative cooling in the label factory

Side discharge EcoCooler

evaporative cooling in the label factory

Low level entry to building

evaporative cooling in the label factory

Ducted air distribution to plate making and main factory

evaporative cooling in the label factory

Discharge grill and extract fan

Ecocooling economical evaporative coolingEcocooling economical evaporative cooling Evaporative Cooling from EcoCooling .... a Low Energy, Low Carbon Alternative to Air-Conditioning